Skip to main content
Version: 1.6.x

Configure the VM on-premise

Install Bookinfo Ratings Application

SSH into the VM on-premise and install the ratings application. Execute the following commands:

# Install the latest version of trusted CA certificates
sudo apt-get update -y
sudo apt-get install -y ca-certificates

# Add DEB repository with Node.js
curl --fail --silent --location https://deb.nodesource.com/setup_14.x | sudo bash -

# Install Node.js
sudo apt-get install -y nodejs

# Download DEB package of the Bookinfo Ratings app
curl -fLO https://dl.cloudsmith.io/public/tetrate/onboarding-examples/raw/files/bookinfo-ratings.deb

# Install DEB package
sudo apt-get install -y ./bookinfo-ratings.deb

# Remove downloaded file
rm bookinfo-ratings.deb

# Enable SystemD Unit
sudo systemctl enable bookinfo-ratings

# Start Bookinfo Ratings app
sudo systemctl start bookinfo-ratings

Verify the ratings Application

Execute the following command to verify that the ratings application can now serve local requests:

curl -fsS http://localhost:9080/ratings/1

You should get output similar to:

{"id":1,"ratings":{"Reviewer1":5,"Reviewer2":4}}

Configure to Trust the Example CA

Remember that you have previously configured the Workload Onboarding Endpoint using a TLS certificate signed by a custom CA. As a result, any software that runs on the VM on-premise and attempts to connect to the Workload Onboarding Endpoint will not trust its certificate by default.

Before proceeding further, you must configure the VM on-premise to trust your custom CA.

First, update the apt package list:

sudo apt-get update -y

Then install the ca-certificates package:

sudo apt-get install -y ca-certificates

Copy the contents of the file example-ca.crt.pem that you have created when you setup the certificates, and place it under the location /usr/local/share/ca-certificates/example-ca.crt on the VM on-premise.

Use your favorite tool to do this. If you have not installed any editors or tools, you could use the combination of cat and dd as follows:

  1. Execute cat <<EOF | sudo dd of=/usr/local/share/ca-certificates/example-ca.crt
  2. Copy the contents of example-ca.crt.pem and paste it in the terminal that you executed the previous step
  3. Type EOF and press Enter to finish the first command

After you have placed the custom CA in the correct location, execute the following command:

sudo update-ca-certificates

This will reload the list of trusted CAs, and it will include your custom CA.

Install Istio Sidecar

Install the Istio sidecar by executing the following commands. Replace ONBOARDING_ENDPOINT_ADDRESS with the value that you have obtained earlier.

# Download DEB package
curl -fLO \
--connect-to "onboarding-endpoint.example:443:${ONBOARDING_ENDPOINT_ADDRESS}:443" \
"https://onboarding-endpoint.example/install/deb/amd64/istio-sidecar.deb"

# Download checksum
curl -fLO \
--connect-to "onboarding-endpoint.example:443:${ONBOARDING_ENDPOINT_ADDRESS}:443" \
"https://onboarding-endpoint.example/install/deb/amd64/istio-sidecar.deb.sha256"

# Verify the checksum
sha256sum --check istio-sidecar.deb.sha256

# Install DEB package
sudo apt-get install -y ./istio-sidecar.deb

# Remove downloaded files
rm istio-sidecar.deb istio-sidecar.deb.sha256

Install Workload Onboarding Agent

Install the Workload Onboarding Agent by executing the following commands. Replace ONBOARDING_ENDPOINT_ADDRESS with the value that you have obtained earlier.

# Download DEB package
curl -fLO \
--connect-to "onboarding-endpoint.example:443:${ONBOARDING_ENDPOINT_ADDRESS}:443" \
"https://onboarding-endpoint.example/install/deb/amd64/onboarding-agent.deb"

# Download checksum
curl -fLO \
--connect-to "onboarding-endpoint.example:443:${ONBOARDING_ENDPOINT_ADDRESS}:443" \
"https://onboarding-endpoint.example/install/deb/amd64/onboarding-agent.deb.sha256"

# Verify the checksum
sha256sum --check onboarding-agent.deb.sha256

# Install DEB package
sudo apt-get install -y ./onboarding-agent.deb

# Remove downloaded files
rm onboarding-agent.deb onboarding-agent.deb.sha256

Install Sample JWT Credential Plugin

For the purposes of this guide, you will be using Sample JWT Credential Plugin to provide your on-premise workload with a JWT Token credential.

Execute the following commands to install Sample JWT Credential Plugin:

curl -fL "https://dl.cloudsmith.io/public/tetrate/onboarding-examples/raw/files/onboarding-agent-sample-jwt-credential-plugin_0.0.1_$(uname -s)_$(uname -m).tar.gz" \
| tar -xz onboarding-agent-sample-jwt-credential-plugin
sudo mv onboarding-agent-sample-jwt-credential-plugin /usr/local/bin/

Copy the contents of the file sample-jwt-issuer.jwk that you have created earlier, and place it under the location /var/run/secrets/onboarding-agent-sample-jwt-credential-plugin/jwt-issuer.jwk on the VM on-premise.

Use your favorite tool to do this. If you have not installed any editors or tools, you could use the combination of cat and dd as follows:

  1. Execute
    sudo mkdir -p /var/run/secrets/onboarding-agent-sample-jwt-credential-plugin/
    cat <<EOF | sudo dd of=/var/run/secrets/onboarding-agent-sample-jwt-credential-plugin/jwt-issuer.jwk
  2. Copy the contents of sample-jwt-issuer.jwk and paste it in the terminal that you executed the previous step
  3. Type EOF and press Enter to finish the first command
  4. Execute
    sudo chmod 400 /var/run/secrets/onboarding-agent-sample-jwt-credential-plugin/jwt-issuer.jwk
    sudo chown onboarding-agent: -R /var/run/secrets/onboarding-agent-sample-jwt-credential-plugin/

Configure Workload Onboarding Agent

Execute the following command to save Agent Configuration into the file /etc/onboarding-agent/agent.config.yaml:

cat << EOF | sudo tee /etc/onboarding-agent/agent.config.yaml
apiVersion: config.agent.onboarding.tetrate.io/v1alpha1
kind: AgentConfiguration
host:
custom:
credential:
- plugin:
name: sample-jwt-credential
path: /usr/local/bin/onboarding-agent-sample-jwt-credential-plugin
env:
- name: SAMPLE_JWT_ISSUER
value: "https://sample-jwt-issuer.example"
- name: SAMPLE_JWT_ISSUER_KEY
value: "/var/run/secrets/onboarding-agent-sample-jwt-credential-plugin/jwt-issuer.jwk"
- name: SAMPLE_JWT_SUBJECT
value: "vm007-datacenter1-us-east.internal.corp"
- name: SAMPLE_JWT_ATTRIBUTES_FIELD
value: "custom_attributes"
- name: SAMPLE_JWT_ATTRIBUTES
value: "instance_name=vm007-datacenter1-us-east,instance_role=app-ratings,region=us-east"
EOF

Through various environment variables, supported by the Sample JWT Credential Plugin, you have configured the desired contents of the JWT Token.