Skip to main content
Version: 1.6.x

Installing Open Policy Agent

Open Policy Agent (OPA) is an open source, general-purpose policy engine that provides a high-level declarative language that lets you specify policy as code. OPA also offers simple APIs to offload policy decision-making from your software.

This document describes a simplified version of the configuring OPA in TSB, to accompany sections where it is used as the external authorization (ext-authz) service. In your actual application there may be differences that require tweaking.

OPA support

Tetrate does not offer support for OPA. Please look elsewhere if you need support for your use case.

For more detailed explanation of the configurations described below, please refer to the official documentation.

Preparing a Policy

OPA requires a policy file written using OPA's policy language to decide if requests should be authorized. Since the actual policy will differ significantly from example to example, details on how to write this file will not be covered in this document. Please refer to the documents in OPA website for details.

One thing to note is the package name specified in the policy file. If you have a policy file that has the following package declaration, you will be using the value helloworld.authz in the container configuration later.

package helloworld.authz

Example: Policy with Basic Authentication

This example shows a policy that only allows users alice and bob to be authenticated via Basic Authentication. If the user is authorized, the user name will be stored in the HTTP header named x-user.

package example.basicauth

default allow = false

# username and password database
user_passwords = {
"alice": "password",
"bob": "password"
}

allow = response {
# check if password from header is same as in database for the specific user
basic_auth.password == user_passwords[basic_auth.user_name]
response := {
"allowed": true,
"headers": {"x-user": basic_auth.user_name}
}
}

basic_auth := {"user_name": user_name, "password": password} {
v := input.attributes.request.http.headers.authorization
startswith(v, "Basic ")
s := substring(v, count("Basic "), -1)
[user_name, password] := split(base64url.decode(s), ":")
}

Storing the Policy in Kubernetes

Assuming your policy is stored in a file named policy.rego, you will need to store the file in a Kubernetes Secret or a ConfigMap.

To create a Secret, execute the following command, replacing namespace with the appropriate value:

kubectl create secret generic opa-policy -n <namespace> \
--from-file policy.rego

If you are using a ConfigMap, execute the following command in the same manner:

kubectl create configmap opa-policy -n <namespace> \
--from-file policy.rego

The name of the resource (opa-policy) may be changed if necessary.

Basic Deployment

The following manifest shows an example that can be used to deploy an OPA service, and an OPA agent with mostly default settings. Remember to replace the package and namespace in the configuration with the proper values.

apiVersion: v1
kind: Service
metadata:
name: opa
namespace: <namespace>
spec:
selector:
app: opa
ports:
- name: grpc
protocol: TCP
port: 9191
targetPort: 9191
---
kind: Deployment
apiVersion: apps/v1
metadata:
name: opa
namespace: <namespace>
spec:
replicas: 1
selector:
matchLabels:
app: opa
template:
metadata:
labels:
app: opa
name: opa
spec:
volumes:
- name: opa-policy
secrets:
secretName: opa-policy
containers:
image: openpolicyagent/opa:latest-envoy
name: opa
securityContext:
runAsUser: 1111
args:
- "run"
- "--server"
- "--addr=localhost:8181"
- "--diagnostic-addr=0.0.0.0:8282"
- "--set=plugins.envoy_ext_authz_grpc.addr=:9191"
- "--set=plugins.envoy_ext_authz_grpc.query=data.<package>.allow"
- "--set=decision_logs.console=true"
- "--ignore=.*"
- "/policy/policy.rego"
livenessProbe:
httpGet:
path: /health?plugins
scheme: HTTP
port: 8282
initialDelaySeconds: 5
periodSeconds: 5
readinessProbe:
httpGet:
path: /health?plugins
scheme: HTTP
port: 8282
initialDelaySeconds: 5
periodSeconds: 5
volumeMounts:
- readOnly: true
mountPath: /policy
name: opa-policy

Assuming you have saved the above manifest in a file named opa.yaml, execute the following command to deploy:

kubectl apply -f opa.yaml

Terminating TLS

In order to secure communications between the ext-authz services (where we use OPA as example) and its clients (gateways and sidecars), you can enable TLS verification. As example, here we will use the Envoy sidecar proxy to terminate TLS also verify TLS certificate coming from the client.

note

The settings in the following samples are for testing purposes only. Please consult your security requirements and craft a different configuration for your production use case

Prepare Certificate

Either use a certificate that was provided by your administrators, or use a self-signed certificate for testing. You may be able to leverage the instructions in the quickstart to create a self-signed certificate.

If you have not already done so, create the Secret to contain the certificates. The secret will be named opa-certs, and will be used later. Assuming you have generated the files opa.key and opa.crt, execute the command below to create the Secret. Replace the value for namespace with an appropriate value.

kubectl -n <namespace> create secret tls opa-certs \
--key opa.key \
--cert opa.crt

Create Envoy Configuration File

Create a file named config.yaml with the following contents. Replace the value for namespace with an appropriate value. This configuration assumes that the admin port is at port 10250, an "insecure" grpc at port 18080, and a grpc port with TLS termination at port 18443.

admin:
address:
socket_address:
address: 127.0.0.1
port_value: 10250

static_resources:
listeners:
# Insecure GRPC listener
- name: grpc-insecure
address:
socket_address:
address: 0.0.0.0
port_value: 18080
access_log:
- name: envoy.access_loggers.file
typed_config:
"@type": type.googleapis.com/envoy.extensions.access_loggers.file.v3.FileAccessLog
path: /dev/stdout
filter_chains:
- filters:
- name: envoy.filters.network.tcp_proxy
typed_config:
"@type": type.googleapis.com/envoy.extensions.filters.network.tcp_proxy.v3.TcpProxy
cluster: grpc_rlserver
stat_prefix: grpc_insecure

# Secured by TLS
- name: grpc-simple-tls
address:
socket_address:
address: 0.0.0.0
port_value: 18443
access_log:
- name: envoy.access_loggers.file
typed_config:
"@type": type.googleapis.com/envoy.extensions.access_loggers.file.v3.FileAccessLog
path: /dev/stdout
filter_chains:
- filters:
- name: envoy.filters.network.tcp_proxy
typed_config:
"@type": type.googleapis.com/envoy.extensions.filters.network.tcp_proxy.v3.TcpProxy
cluster: grpc_rlserver
stat_prefix: grpc_simple_tls
transport_socket:
name: envoy.transport_sockets.tls
typed_config:
"@type": type.googleapis.com/envoy.extensions.transport_sockets.tls.v3.DownstreamTlsContext
common_tls_context:
tls_certificates:
- certificate_chain: { filename: /certs/tls.crt }
private_key: { filename: /certs/tls.key }

Create a ConfigMap to store the configuration in Kubernetes. Replace the value for namespace with an appropriate value.

kubectl create configmap -n <namespace> opa-proxy \
--from-file=config.yaml

Deploy Service

Create a file named opa-tls.yaml with the following contents. Replace the value for namespace with an appropriate value.

apiVersion: v1
kind: Service
metadata:
name: opa-tls
namespace: <namespace>
spec:
selector:
app: opa-tls
ports:
- name: http
port: 8080
targetPort: 8080 # Doesn't go through Envoy
- name: grpc-insecure
port: 18080
targetPort: 18080
- name: grpc-tls
port: 18443
targetPort: 18443
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: opa-tls
namespace: <namespace>
spec:
replicas: 1
selector:
matchLabels:
app: opa-tls
template:
metadata:
labels:
app: opa-tls
name: opa-tls
spec:
containers:
- name: envoy-proxy
image: envoyproxy/envoy-alpine:v1.18.4
imagePullPolicy: Always
command:
- "/usr/local/bin/envoy"
args:
- "--config-path /etc/envoy/config.yaml"
- "--mode serve"
ports:
- name: grpc-plaintext
containerPort: 18080
- name: grpc-tls
containerPort: 18443
volumeMounts:
- name: proxy-config
mountPath: /etc/envoy
- name: proxy-certs
mountPath: /certs
- name: opa
image: openpolicyagent/opa:latest-envoy
securityContext:
runAsUser: 1111
ports:
- containerPort: 8181
args:
- "run"
- "--server"
- "--addr=localhost:8181"
- "--diagnostic-addr=0.0.0.0:8282"
- "--set=plugins.envoy_ext_authz_grpc.addr=:9191"
- "--set=plugins.envoy_ext_authz_grpc.path=demo/authz/allow"
- "--set=decision_logs.console=true"
- "--ignore=.*"
- "/policy/policy.rego"
livenessProbe:
httpGet:
path: /health?plugins
scheme: HTTP
port: 8282
initialDelaySeconds: 5
periodSeconds: 5
readinessProbe:
httpGet:
path: /health?plugins
scheme: HTTP
port: 8282
initialDelaySeconds: 5
periodSeconds: 5
volumeMounts:
- readOnly: true
mountPath: /policy
name: opa-policy
volumes:
- name: opa-policy
configMap:
name: opa-policy
- name: proxy-certs
secret:
secretName: opa-certs
- name: proxy-config
configMap:
name: opa-proxy

Apply opa-tls.yaml using kubectl:

kubectl apply -f opa-tls.yaml

Once the above deployment is ready, you should set up the client side appropriately to use grpcs://opa-tls.<namespace>.svc.cluster.local:18443.